In our countdown to classes series here is tip number
Nice threads doesn’t refer to topics on message boards (for the more modern) or the white suit John Travolta sported in ‘Saturday Night Fever’ (for those of us more vintage than modern). I’m talking about the myriad thread choices we have when we are piecing and quilting (and hand sewing too). Do we choose cotton, metallic, silk or polyester? And what does weight mean?
Different numbering systems are used in order to specify different sewing threads. Apparently different spinning mills used their own thread sizing systems and there are still several in operation today. Complex n’est pas?
Basically the systems are based on weight. The Tex system was invented to be the standard in the industry. In this system the higher the number the heavier the thread. Unfortunately it hasn’t quite taken the quilting world by storm.
What quilters like are the weight standard and the number standard. Under the weight system the larger the number the finer the thread. So 50wt is finer than 30wt. Why? Because it takes 50 metres of 50wt to weigh one gram whereas it only takes 30 metres of 30wt to weigh one gram because it’s heavier.
Confused? We haven’t even mentioned plies (the number of yarns twisted together to make a single thread) or the denier standard that embroiderers use! That standard is based on the weight of nine kilometres of thread. Think about that when you’re tying up your roses with your old panty-hose!
There are even formulas to determine thread count which I won’t divulge here but trust me they exist.
Your formula is to use a good quality thread. Personally I like Rasant (a core-spun thread – meaning it has a polyester core and cotton covering.). For general piecing it is strong, robust and reliable. You can use it for quilting too and generally beginners would use this in one of our classes without any trouble. Plus there are lots of colours to choose from.
For free motion quilting I really like Wonderfil Mirage (a 30wt rayon) because it is a variegated thread that really pops and enhances the quilting. Of course if you use a finer thread such as Mirage you need to use the appropriate bobbin thread (also finer) such as Invisafil so it doesn’t all end in tears and broken threads.
There are videos here from Wonderfil showing what you can do with Mirage thread.
Linen threads are very useful for hand quilting and, if you have hyper-embellishment disorder like me you will favour metallic and silk threads for that extra ta-da element.
I think we’ll have a closer look at the different threads and what they can do for your quilting during the year because there really are dozens of options.
When it comes to thread choices, colour is another issue. Did you know that Marsala is the Pantone colour of the year?
It is described as a “hearty yet stylish tone”. Some others say it’s more reminiscent of bodily functions and decrepit buildings. What do you think? Is it outside your comfort zone?
Your task today is to :
Have a look in your stash at what threads you have. Is there an abundance of neutrals or are 80% of them the same colour (I have lots of blue)? Have a look at them again and see if there are some gaps in your choices – either colour-wise or texture-wise. Resolve to widen your repertoire this year.
You’re halfway through your tasks now so you deserve a little reward. Have a look at this video. It’s a little sexist but it made me smile.
If you’ve missed any posts in this series find them here:
Pingback: Top Quilting Tips – No. 4 – A Pressing Problem | Smoke Signals from a Log Cabin
Kaye really fantastic information, especially about threads. Looking forward to learning more.
Marsala just takes me back to the 70s!….that Italian restaurant in the Valley you’d go to after the discos! Every dish was based around Marsala and then the owner(Lucky) would give you a free glass of it at the end of the meal….. Which often ended up in the pot plants!….I think it was called Luckys !